履带移动式装置

Tracked mobile devices

履带底盘的优点是着地面积比车轮式大，所以着地压强小；另外与路面粘着力较强，所能提供的驱动力大。履带底盘通过将环状的循环履带环绕在驱动轮和一系列滚轮外侧，使车轮不直接于地面接触，而是通过循环履带于地面发生作用，再通过驱动轮带动履带，实现车轮在履带上的相对滚动的同时，履带在地面反复向前铺设，从而带动底盘运动。

The advantage of the track chassis is that the ground area is larger than the wheel type, so the pressure on the ground is small; Another there has the strong adhesion with the road, it can provide a large driving force. The track chassis surrounds the drive wheels and the outside of a series of rollers by circulating endless crawler belts, so that the wheels are not in direct contact with the ground, but through circulating the role of the track and the ground, and then driven by the wheel drive track, thereby realizing relative rolling of the wheel on the crawler belt, tracks are repeatedly laid on the ground, driving the chassis.

履带式底盘一般采用仿坦克结构设计，即在底盘两侧布置一对带有驱动装置的双履带结构。每个履带机构由一个驱动轮，一个导轮和多个负重轮组成，通过安装时的对轮系限位，将包在外侧的履带张紧，驱动轮带动履带相对车轮移动，导轮限制履带在运动中的位置，负重轮支承整个车体的重量。

The chassis of track generally use imitation tank structure to design, that arranged a pair of drive devices with dual track structure on both sides of the chassis. Each track mechanism consists of a drive wheel, a guide wheel and a number of load wheels, the track on the outer side is tensioned by the gear train limit at the time of installation, the drive wheel drives the track to move relatively to the wheel, the guide wheel limits the position of the track during movement, and the weight wheel supports the weight of the entire body.

采用履带行走机构，具有较强的爬坡能力，能够适应各种堆场工况。

Adopted track traveling drive, has the strong gradeability, and be able to adapt to a variety of yard conditions.

履带移动式堆料装置

Track Mobile Stacker

本产品设计用于接收散装颗粒。直接从大容量自卸卡车，以最高625m3/小时的给料速度（速度取决于物料密度）接收密度最大为1.6 t/m3的散装颗粒，并直接运输到一个移动粉碎设备、筛选设备或其他工艺设备。

This product is designed to receive bulk particles. Receicing the bulk particles which the maximum density is 1.6 t/m3, and in the max feending speed of 625 m3/h(the speed depends on the material density), and the bulk patrticles will be transported directly from large-capacity dump truck to a mobile crushing plant, screening equipment or other process equipment.

堆料装置适用于各种块状、粒状等松散物料堆场堆料。它包括：行走机构；进料装置；皮带机系统；臂架俯仰机构；臂架旋转机构；液压控制系统；司机室；配电系统（移动式电站或电缆卷筒）等。

The stacker device could be applied for all kinds of blocky and granular material. It composed of mobile unit, loading unit, conveying belt unit, arm stretch unit, piling system, hydraulic pressure control system, driver cabinet and electricity supply unit(mobile power generator or wire rolls).

其特征是：全部系统安装在移动式平台上，可以在堆场场地内任意位置自由移动，行走轮采用履带，无须在堆场内布置固定轨道，增加堆场利用率；进料装置具备稳流功能，保证连续、均匀、平稳地供料；自卸卡车或装载机以最快的速度直接卸料，极大提高了运营能力。

Its characterize: All systems are mounted on a mobile platform, it can be free to move anywhere in the yard site, walking wheel uses track, there is no need to place a fixed track in the venue, increase yard utilization; Feeding device has steady flow function, ensuring continuous, uniform and smooth feeding; dump trucks or loaders are unloaded as quickly as possible, greatly improving operational capability.

堆料机参数

Parameter of the stacker

《堆料机系统配置表》

System configuration of stacker